Practice Free NS0-184 Exam Online Questions
Config Advisor reports that you have a single point of failure on a stack of shelves.
After investigation, you have assigned the following ports to each stack:
stack 1 – ports 0a and 0b
stack 2 – ports 3a and 4b
stack 3 – ports 4a and 3b
In this scenario, which two changes would you make to the cabling to solve the problem? (Choose two.)
- A . Cable stack 3 to ports 4a and 0b.
- B . Cable stack 2 to ports 4a and 4b.
- C . Cable stack 1 to ports 0a and 3b.
- D . Cable stack 3 to ports 3a and 3b.
You are planning to update your running switch environment. You need to determine if certain conditions exist before the FASTPATH software and reference configuration file (RCF) on a NetApp CN16xx cluster switch can be installed.
Which condition must exist in this scenario?
- A . You must set the port configuration to default for all ports before running the portcfgdefault portnumber command.
- B . The cluster must be a fully functioning cluster (no error log messages or other issues).
- C . All ISL ports must be moved to a different switch.
- D . You can only update your switch environment within offline windows.
A customer has a front end network with mixed speeds (10Gbps and 1Gbps). The customer wants you to use the 1Gbps link for redundancy.
In this scenario, what would you do to meet this requirement?
- A . Create a dynamic multimode ifgrp.
- B . Create a single-mode ifgrp.
- C . Create a static multimode ifgrp.
- D . Use broadcast-domains.
You are preparing for the installation of a new AFF A400 system with NS224 NS224 storage shelves. You want to gather information on the connectivity options for the external shelves.
In this scenario, which NetApp tool would you use for this task?
- A . Hardware Universe
- B . Active IQ Config Advisor
- C . Active IQ Unified Manager
- D . Interoperability Matrix Tool
Click the Exhibit button.
You want to add an AFF A400 system to an existing 4-node cluster.
Referring to the exhibit, which number points to the ports that are used to cable the new nodes to the cluster interconnect switches.
- A . 1
- B . 2
- C . 3
- D . 4
Which command would be used to measure the throughput and latency of traffic between nodes?
- A . qos statistics workload performance show
- B . cluster ping-cluster
- C . network test-path
- D . statistics node show
You must replace a FAS2750 switchless cluster with an AFF A220 switchless cluster for a customer. The customer requires that you transfer the data from the FAS2750 cluster to the AFF A220.
In this scenario, which two methods would you use to migrate the customer’s data? (Choose two.)
- A . Establish an SVM-DR relationship between the two clusters and activate the destination SV
- B . Remove all of the HDD drives from the FAS cluster and install them into the AFF cluster.
- C . Install SAS cables between the two clusters and use the vol move command.
- D . Provide cluster switches and build a 4-node cluster, then use the vol move command.
You just finished the installation of a new 4-node cluster and the customer asks you to move an already used Ethernet port to a new broadcast domain.
Which action would you use to accomplish this task?
- A . Use the network port broadcast-domain split command.
- B . Use the network port broadcast-domain create command.
- C . Use the network port broadcast-domain move command.
- D . Remove all LIFs on this port and create a new broadcast domain.
You are creating an aggregate on a new FAS8200 with two DS224C shelves. Your customer wants to be able to use the Disk Maintenance Center.
In this scenario, what is the minimum number of spare disks required per node and disk type?
- A . 4
- B . 3
- C . 2
- D . 1
You are creating an aggregate on a new FAS8200 with two DS224C shelves. Your customer wants to be able to use the Disk Maintenance Center.
In this scenario, what is the minimum number of spare disks required per node and disk type?
- A . 4
- B . 3
- C . 2
- D . 1