Practice Free HPE7-A06 Exam Online Questions
Multiple Answers: Which settings should be checked first when troubleshooting an HPE switch stack with inter-switch latency?
- A . Stack cable connections
- B . Spanning tree configuration
- C . MTU configuration
- D . Stack firmware versions
A, C, D
Explanation:
Stack connections, MTU, and firmware versions are critical for optimal stack performance.
In a WLAN deployment, what does the term “channel bonding” refer to?
- A . Merging multiple channels to increase bandwidth
- B . Setting multiple VLANs on the same SSID
- C . Using 5 GHz and 2.4 GHz bands simultaneously
- D . Broadcasting the same SSID across all APs
A
Explanation:
Channel bonding combines two or more channels, increasing the effective bandwidth for higher data rates in WLANs.
In a multi-VLAN HPE network, which protocol enables devices in different VLANs to communicate through a centralized router or Layer 3 switch?
- A . Inter-VLAN routing
- B . DHCP relay
- C . STP
- D . IGMP Snooping
A
Explanation:
Inter-VLAN routing allows devices in different VLANs to communicate through routing, facilitating cross-VLAN traffic.
Multiple Answers: Which two protocols are primarily used to integrate ClearPass with HPE devices for AAA functions?
- A . RADIUS
- B . SNMP
- C . TACACS+
- D . LLDP
A, C
Explanation:
RADIUS and TACACS+ are standard protocols for AAA, providing authentication, authorization, and accounting for ClearPass integration.
When deploying a WLAN for voice over Wi-Fi, which factor is most critical to ensure high-quality voice connections?
- A . Low latency
- B . High DHCP lease time
- C . Static IP addresses
- D . High transmit power
A
Explanation:
Low latency is crucial for voice quality in Wi-Fi, as high latency can cause delays, echo, and poor voice quality.
Which feature on an HPE switch allows multiple VLANs to be transported across a single physical link?
- A . VLAN tagging (802.1Q)
- B . Link Aggregation
- C . Storm Control
- D . BPDU Guard
A
Explanation:
VLAN tagging with 802.1Q allows multiple VLANs to share a single physical link, supporting VLAN segmentation over trunks.
In a Layer 3 network, which protocol ensures redundancy by allowing multiple routers to share a virtual IP address?
- A . VRRP
- B . STP
- C . IGMP
- D . LLDP
A
Explanation:
VRRP (Virtual Router Redundancy Protocol) provides gateway redundancy by allowing routers to share a virtual IP address.
Multiple Answers: For enhanced port security in an HPE network, which two configurations can prevent unauthorized devices from gaining access?
- A . 802.1X with EAP-TLS
- B . Static IP addresses
- C . MAC-based authentication
- D . IGMP Snooping
A, C
Explanation:
Which technology in HPE networks provides efficient path selection and load balancing across multiple equal-cost paths?
- A . LACP
- B . RSTP
- C . ECMP
- D . VRRP
C
Explanation:
Equal-Cost Multi-Path (ECMP) enables efficient load balancing across multiple paths with equal cost, optimizing network performance.
To avoid co-channel interference in a large WLAN deployment, what should be minimized on adjacent access points?
- A . Channel overlap
- B . Transmit power
- C . SSID broadcast
- D . DHCP lease time
A
Explanation:
Minimizing channel overlap between adjacent APs helps reduce co-channel interference, improving overall network performance.