Practice Free H19-401_V1.0 Exam Online Questions
AdjSid ― must be a local label, and PrefixSid ― must be a global label.
- A . True
- B . False
Regarding the description of the remote networking of iMaster NCE-Campus authentication service, which of the following is correct? (Multiple choice)
- A . iMaster NCE-Campus has passed the ESN management certification component. When iMaster NCE-Campus receives a connection request from the authentication component, it verifies whether the ESN already exists. The authentication component and iMaster NCE-Campus verify each other’s certificates. After the verification passes, they can be connected normally.
- B . If an enterprise has multiple branches, separate remote authentication services can be deployed in the branches to improve the speed and reliability of branch authentication.
- C . When installing the authentication component, select the southbound address of the iMaster NCE-Campus that is actively connected. After the authentication component is installed, a registration request is automatically initiated to iMasterNCE-Campus without establishing a long TCP connection.
- D . When the tenant administrator delivers configuration to the device, he can select the authentication component as the Portal server or Radius server.
Which of the SSL VPN functions on the firewall is controlled by the license?
- A . Number of virtual gateways on the entire machine
- B . The number of locally configurable users of the entire SSL VPN
- C . Maximum number of concurrent users of the entire SSL VPN
Huawei SD-WAN solution, iMaster NCE establishes a management channel with CPE equipment through Restful protocol.
- A . True
- B . False
iMaster NCE-CampusV300RO22CO0 version, regarding the device management and control-configuration consistency function feature description, which is correct? (Multiple Choice)
- A . Netconf protocol, V5 devices support copy-config delivery in full, and the netconf configuration will not overwrite the cli configuration; Spruce does not support copy-config, and the netconf configuration will overwrite the cli configuration.
- B . Regarding the configuration saving mechanism, the save command of V5 device netconf is to copy-config the running configuration to startup, and the cli can execute the save command; the Yunshan implementation is consistent with V5.
- C . The current netconf interface provided by Yunshan equipment is weaker than CLI. CLI/SNMP triggers configuration changes and does not actively notify the controller.
- D . In terms of storage of configuration data, there are two copies of V5 device configuration data: netconf db and cli/snmp db; netconf db only contains netconf configuration, cli/snmp db contains the full configuration; the configuration data of Yunshan devices comes from the same source, the configuration data issued by netconf, snmp, and cli are finally summarized and stored in a db.
iMaster NCE-CampusInsight’s application experience 360 can implement which of the following based on flow detection?
- A . Three 9-packet loss detection
- B . Four 9-packet loss detection
- C . Six 9-packet loss detection
- D . Five 9-packet loss detection
If one SSD in a storage system has a heavy workload and its lifespan is much shorter than the other SSDs, which of the following techniques can avoid this situation?
- A . In-disk RAID
- B . Garbage collection
- C . Bad block isolation
- D . Wear leveling
AirEngine 5761-11El is a secure and high-performance AP dedicated to coal mine scenarios. The customized intrinsically safe antenna can achieve extremely long-range coverage of 500+ meters.
- A . True
- B . False
What are the advantages of POE switches compared to POE power injectors? (Multiple choice)
- A . Can be managed centrally
- B . No additional power cord required
- C . PoE port can be managed remotely
- D . POE switches are low cost
How to automatically identify obstacles in CAD drawings in the WLAN Planner tool? (Multiple choice)
- A . Click the automatic recognition obstacle button in the CAD floor to automatically identify obstacles.
- B . Click one-click recognition on the extraction page of CAD drawings to detect walls, identify doors, windows, pillars, etc.
- C . Zoom in on the CAD drawing on the extraction page, click on the layer and right-click to select the obstacle type to set up obstacles.
- D . CAD drawings set obstacles in the layer bar on the right side of the extraction page