Practice Free D-VXR-OE-23 Exam Online Questions
What is the default load-balancing policy for VxRail Port Groups for a system deployed with a predefined network profile1?
- A . Route based on source MAC hash
- B . Route based on IP hash.
- C . Route based on physical NIC load
- D . Route based on originating virtual port.
D
Explanation:
The default load-balancing policy for VxRail Port Groups in a system deployed with a predefined network profile is "Route based on originating virtual port." This policy distributes network traffic based on the virtual port ID from which the traffic originates, ensuring that traffic from a particular virtual machine (VM) is consistently routed through the same physical network adapter.
Reference: VMware vSphere Networking Guide
A VxRail administrator wants to search for VxRail related knowledge base articles through the VxRail Manager user interface.
Which action must the administrator perform to use this feature?
- A . Register for a VxRail Community login and set the credentials in VxRail Manager
- B . Work with Dell EMC to register the VxRail appliance in the install Database
- C . Set the Dell EMC Support username and password in VxRail Manager
- D . Configure proxy settings in VxRail Manager for access to the Internet
An administrator wants to perform maintenance on a VxRail system.
What should the VxRail Cluster Health Monitoring status be set to before starting the maintenance activity?
- A . Disabled
- B . Enabled
- C . Suspended
- D . Maintenance mode
What is the default VLAN ID for internal VxRail management network for node discovery?
- A . 1612
- B . 1614
- C . 3939
- D . 3989
At what object levels are vSAN performance information available?
- A . Host, VM, and Application
- B . Cluster, Host, and VM
- C . Cluster, VM, and Application
- D . Host, VM, and Process
At what object levels are vSAN performance information available?
- A . Host, VM, and Application
- B . Cluster, Host, and VM
- C . Cluster, VM, and Application
- D . Host, VM, and Process
A VxRail administrator is concerned that the Integrated NIC is a single point of failure on VxRail nodes.
How should the network traffic be balanced to increase redundancy?
- A . Across two Integrated NICs
- B . Across Integrated NIC and PCIe NIC ports
- C . Across two ports on a PCIe NI
- D . Across two different ports of the same Integrated NIC.
What is the limit of locally cached managed storage included in the CloudArray Virtual Edition license packaged with a VxRail system?
- A . 1 TB
- B . 5 TB
- C . 10 TB
- D . 15 TB
The VxRail customer wants to change the hostname and IP address of the VxRail Manager VM.
What should be done to complete this task?
- A . Generate the SolVe procedure and follow the instructions
- B . Refer to the VxRail Administration Guide and follow the instructions
- C . Contact Dell Support for assistance
- D . Refer to VMware documentation and follow the instructions
What two failure events cause the vSAN to start rebuilding components immediately on the VxRail system? (Select 2)
- A . Interlace controller
- B . ESXi host
- C . Capacity device
- D . Storage controller
BC
Explanation:
Two failure events that cause vSAN to start rebuilding components immediately on the VxRail system are:
ESXi host failure
Capacity device failure
When an ESXi host fails, vSAN detects the loss of the host and initiates the rebuilding of the affected components to maintain data availability and integrity. Similarly, when a capacity device (such as an SSD or HDD) fails, vSAN starts the rebuild process to ensure that data remains protected and accessible.
Reference: VMware vSAN Failure Handling: vSAN Failure Handling