Practice Free D-VXR-DY-23 Exam Online Questions
In addition to the VxRail YouTube video, links to what resources should the SE send to the customer, according to the VxRail PEQ Engagement Details worksheet?
- A . VxRail vCenter Server Planning Guide VxRail Network Guide
- B . VxRail QuickStart Guide VxRail Network Guide
- C . VxRail vCenter Server Planning Guide Network Validation Tool
- D . VxRail QuickStart Guide Network Validation Tool
A company has a simple, 4 node VxRail cluster. The VxRail is running version 3.5 and utilizes a vSphere standard license. The company has asked for a VxRail software upgrade.
What are the steps for the upgrade?
- A . Log in to VxRail Manager, select "Internet Upgrade", then follow the prompts.
- B . Log in to support.emc.com and download the upgrade packages.
- C . Place all four nodes into maintenance mode.
- D . Contact Dell EMC support to request the upgrade to the VxRail cluster.
An implementation engineer has just finished connecting a multi-rack VxRail cluster over a Layer 3 network. When attempting to migrate System VMs from the first rack to the second rack, they receive an error.
What is a possible reason for the error?
- A . vSphere DRS must be enabled
- B . System VMs must be on different subnets
- C . Only Layer 2 networking is supported
- D . System VMs must be on the same subnet
Which series of VxRail nodes are designed for general-purpose workloads with the smallest possible footprint in a 4-node configuration?
- A . P Series
- B . E Series
- C . D Series
- D . G Series
You are asked to cable up a VxRail G Series cluster to a redundant pair of 1/10G switches.
What is the cabling best practice for this configuration?
- A . Cable ports 1 and 2 to one switch. Cable ports 3 and 4 to the other switch.
- B . Cable ports 1 and 2 to one switch. Cable ports 3 and 4 to the other switch. Cable BMC from node 1 and 2 to one switch. Cable BMC from node 3 and 4 to the other switch.
- C . Cable ports 1 and 3 to one switch. Cable ports 2 and 4 to the other switch.
- D . Cable ports 1 and 3 to one switch. Cable ports 2 and 4 to the other switch. Cable BMC from node 1 and 3 to one switch. Cable BMC from node 2 and 4 to the
What accurately describes the positioning of a VxRail?
- A . Can start small and grow with a low entry cost
- B . Software defined solution with rack scale and integrated networking
- C . Can start small and grow to hundreds of nodes
- D . Converged architecture with enterprise grade resiliency
A BMC interface webpage is reachable but unresponsive.
What should be done to resolve this problem?
- A . NDU to latest bundle of VxRail software
- B . Reboot the node
- C . Reset the BMC through /tmp/vspexblue/bin/ipmitool mc reset cold
- D . Upgrade the BMC firmware
Which VxRail Series is designed to support a VDI environment and requires a GPU card in each host?
- A . S Series
- B . V Series
- C . G Series
- D . P Series
An implementation engineer is tasked with expanding an 8-node VxRail E560 cluster with an S570 node. Each node has 1GbE RJ45 ports.
What must the engineer consider when expanding the cluster?
- A . All nodes in the cluster must be the identical series
- B . E Series nodes require more capacity before expansion
- C . Node limit has been reached on the cluster
- D . AMD- and Intel-based nodes cannot be mixed
What setting is used for the object space reservation in the VXRAIL-SYSTEM-STORAGE-PROFILE?
- A . 75% Reservation
- B . 50% Reservation
- C . Thick Provisioning
- D . Thin Provisioning