Practice Free D-PE-FN-23 Exam Online Questions
Which type of addressing does UEFI boot mode use?
- A . 64 bit
- B . 128 bit.
- C . 512 byte
- D . Virtual
A system administrator wants to remove and replace their operating system installation with a newer version. The administrator is using a Dell EMC Rack server with an iDRAC set up correctly.
Which tools are required to perform this operation?
- A . iDRAC, SupportAssist, and Virtual Console
- B . iDRAC, Virtual Console, and Virtual Media
- C . iSM, Repository Manager, and Virtual Console
- D . iDRAC, OMSA, and iSM
Where is a tower server commonly deployed, and why?
- A . Branch or remote location, because a rack is not needed
- B . Datacenter, because tower servers tend to be more powerful so more work can be done in the same physical space
- C . Branch or remote location, because of security concerns
- D . Datacenter, due to more PCI support allowing for more external storage
What is the objective of server configuration management in an enterprise environment?
- A . Reduce cost of servers regardless of workload types utilization types, or performance requirements.
- B . Maximize performance per watt at all utilization levels and workload types while still meeting performance requirements.
- C . Maximize server performance, regardless of workload, utilization, or performance requirements.
- D . Minimize cost of servers and to extend the lifetime of servers being used.
A system administrator needs to configure an offsite shared mailbox across multiple users.
Which protocol should be used to avoid email loss and keep the mailbox synchronized on all clients simultaneously?
- A . SMTP
- B . MX
- C . IMAP
- D . POP
Which RAID configuration requires the most disk overhead?
- A . RAID 5
- B . RAID 6
- C . RAID 50
- D . RAID 60
What is the amount of hard drives request per RAID set, when configure RAID 50?
- A . 2
- B . 3
- C . 4
- D . 6
What is the maximum amount of hard drives required per RAID set, when configuring RAID 50?
- A . 2
- B . 3
- C . 4
- D . 5
An administrator has configured an iSCSI storage array directly connected to a production server. The production application installed on the server relies on a database accessing data in the storage array. Clients are accessing the application through the local network.
Which storage infrastructure is described above?
- A . LAN
- B . NAS
- C . DAS
- D . SAN
An administrator experiences a failure in one of the two redundant power supplies in a Dell EMC PowerEdge server. The administrator has a shelf spare, but it has a different wattage rating from those in the server.
What will happen if the administrator installs the spare power supply in the existing configuration?
- A . Power Supply Mismatch alert is issued; the original power supply is used and the newly installed power supply is not used
- B . Power Supply Mismatch alert is issued; both power supplies are disabled, resulting in the system being powered down
- C . Differences in supply wattages is recognized; power is conditioned so that the supply drawing the lower wattage is used
- D . Power Supply Mismatch alert is issued; the original power supply is disabled and the newly installed supply is used