Practice Free D-MSS-DS-23 Exam Online Questions
A Dell Unity XT hybrid flash array system is configured with FAST Cache to optimize data access for OLTP workloads.
What level of data granularity is tracked and promoted to the secondary cache?
- A . 8KB
- B . 256KB
- C . 64 KB
- D . 128 KB
Which encryption algorithm is used for SMB shares on Dell EMC Unity?
- A . AES-CCM
- B . AES128-GCM
- C . AES-CMAC
- D . HMAC-SHA256
What is the maximum capacity of a file system on a Dell Unity XT 380?
- A . 64 TB
- B . 32 TB
- C . 256 TB
- D . 128 TB
From which Dell EMC storage system can a Dell EMC PowerStore array natively import data?
- A . VNX
- B . PowerVault
- C . VMAX
- D . VNX2
A customer asks you about the maximum load of their new Dell EMC SC Series array.
Which term should you use in response?
- A . MB
- B . IOPS
- C . CPU Cycles
- D . Latency
Based on best practices, what should be the first step when designing a new Dell Unity XT solution?
- A . Gather impl.bin configuration file
- B . Calculate the aggregate performance of all hardware
- C . Run netstat on the host
- D . Meet customer and obtain Live Optics report, if applicable
A customer has a Dell Unity XT array with a dynamic pool of six 600 GB drives using RAID 5 protection. They ask you for guidance about their plan to increase capacity by adding seven 600 GB drives with RAID 6 protection.
What should be your response?
- A . Add the drives, then use UEMCLI to change the RAID width
- B . RAID width set in drive partnership groups cannot be changed
- C . Unisphere allows them to change the RAID width
- D . Start a new drive partnership group with seven 600 GB drives
Which optional I/O Module card type is supported for both Dell PowerStore T and Dell PowerStore X?
- A . 25GbE
- B . 8 Gb Fibre Channel
- C . 10GbEBaseT
- D . 32 Gb Fibre Channel
What initiates an automatic NAS server failover to the peer SP?
- A . Network link failure
- B . Resource balancing algorithm
- C . Assisted internal migration
- D . SP hardware fault
DRAG DROP
In vCenter, what is the correct order of steps to create a VM in a storage container provisioned on a Dell EMC Power Store system?
