Practice Free 5V0-22.23 Exam Online Questions
A large financial company has an existing vSAN 7.0 U1 cluster containing production virtual machines and the vCenter Server. The cluster needs to be physically moved to another location within the datacenter to allow new racks to be installed, so the platform needs to be powered down.
Which action should the vSAN administrator take to perform this procedure safely?
- A . Enter Maintenance Mode with No data migration
- B . Enter vSAN Enhanced durability mode
- C . Enter Maintenance Mode with Ensure accessibility option
- D . Enter Maintenance Mode with Full data migration
While preparing to update a vSAN cluster, an administrator finds that the firmware revision of the onboard storage controllers is no longer listed as supported in the Hardware Compatibility Guide, but new firmware is available.
Which action should the administrator take upon discovering this piece of information?
- A . Revert the cluster’s on-disk format to the previous version.
- B . Replace all storage controller hardware.
- C . Configure additional external storage resources.
- D . Use vSphere Lifecycle Manager to update the controller firmware.
A vSAN administrator has reported a security vulnerability to the security officer of the organization. Currently, the vSAN cluster runs on vSAN 7.0. The administrator suggests patching the vSAN cluster and gets approval from the security officer to apply the latest patch for vSAN.
The administrator uses vSphere Lifecycle Manager to apply the patch to the current image.
The organization requirements state that patches should be installed as fast as possible on the hosts.
Which configuration should the administrator apply to complete this installation?
- A . Enable the quick boot feature in the host remediation settings for the baselines.
- B . Disable the hardware compatibility check in the host remediation settings for the images.
- C . Enable the quick boot setting in the host remediation settings for the images.
- D . Disable HA admission control in the host remediation settings for the baselines.
All of the virtual machines running on a hybrid vSAN datastore have this storage policy assigned:
Failures to Tolerate (FTT) rule is set to “2 Failures – RAID-1 (Mirroring)”.
The vSAN administrator needs to reduce the amount of vSAN datastore capacity the virtual machines will consume.
Which action should the vSAN administrator take to meet this goal?
- A . Change the FTT rule to “1 Failure – RAID-1 (Mirroring)”, and select “Now” for Reapply to VMs.
- B . Add the “Flash read cache reservation” rule to the storage policy, and set to 0%.
- C . Disable Operations reserve and Host rebuild reserve and click “Apply”.
- D . Modify the FTT rule to “2 Failures – RAID-5 (Erasure Coding)”.
A single disk in a vSAN disk group suffers from an unrecoverable hardware failure. This causes vSAN to set the health status for all disks in the group to Permanent disk loss, indicating disk failure. All other disks, however, have not suffered from a hardware failure.
Why would vSAN mark all disks in this manner?
- A . The vSAN disk management service has failed.
- B . The key management server is offline.
- C . Deduplication and compression are enabled.
- D . The affected vSAN node is offline.
An administrator is deploying a new 2-node vSAN cluster with a shared witness to a remote location.
Which requirement must be met?
- A . The ESXi host’s controller cache and advanced features must be disabled.
- B . The ESXi host’s drives must be configured in RAID 1 to support Failures to Tolerate of 1.
- C . The ESXi hosts must have SSDs or NVMe configured for Virtual Flash File System.
- D . The ESXi hosts must have a minimum of 64 GBs of memory.
An organization is facing vSAN storage capacity challenges on one of their vSAN enabled clusters, while other vSAN enabled clusters are underutilized. The current vSAN version is 7.0 U1.
Which vSAN feature should be used to resolve this challenge in the quickest way?
- A . vSANHCIMesh
- B . vSAN Replication
- C . vSAN Stretched Clusters
- D . vSAN Datastore(s)
A vSAN administrator is troubleshooting poor performance of vSAN cluster while vCenter is not available. The vSAN administrator decides to use a command line tool to monitor real-time vSAN IOPS, throughput, and other metrics on ESXi host.
Which command line tool should be used?
- A . vimtop
- B . esxcli
- C . esxcfg
- D . vsantop
A vSAN administrator has two identical VMware vSAN clusters, one for staging workloads and another for production workloads. Due to an unforeseen capacity requirement, the vSAN administrator is tasked with merging the staging vSAN cluster into the production.
Which two actions should the vSAN administrator perform on the staging cluster prior to moving the vSAN nodes to the production cluster? (Choose two.)
- A . Remove all capacity drives.
- B . Delete all Disk Groups.
- C . Enable File Services.
- D . Disable vSAN Services.
- E . Mark the disks for partial reservation.
A vSAN administrator is deploying a four node vSAN cluster to a new work location. To help with configuration and consistency, the vSAN administrator plans to use Ouickstart
Which two prerequisites must be met prior to taking this action? (Choose two.)
- A . vDS must be created tor vSAN and management traffic.
- B . DRS and HA have been enabled.
- C . vCenter is running on one of the four nodes.
- D . Hosts are running 6.0 U2 or later.
- E . Hosts do not have existing vSAN or network configurations.