Practice Free 200-301 Exam Online Questions
Refer to the exhibit.
A network engineer started to configure two directly-connected routers as shown.
Which command sequence must the engineer configure on R2 so that the two routers become OSPF neighbors?
A)
B)
C)
D)
- A . Option A
- B . Option B
- C . Option C
- D . Option D
What is a reason why an administrator would choose to implement an automated network management approach?
- A . Reduce inconsistencies in the network configuration.
- B . Enable "box by box" configuration and deployment.
- C . Decipher simple password policies.
- D . Increase recurrent management costs.
Which communication interaction takes place when a southbound API Is used?
- A . between the SDN controller and PCs on the network
- B . between the SON controller and switches and routers on the network
- C . between the SON controller and services and applications on the network
- D . between network applications and switches and routers on the network
What is a benefit of VRRP?
- A . It provides traffic load balancing to destinations that are more than two hops from the source.
- B . It provides the default gateway redundancy on a LAN using two or more routers.
- C . It allows neighbors to share routing table information between each other.
- D . It prevents loops in a Layer 2 LAN by forwarding all traffic to a root bridge, which then makes the final forwarding decision.
Two switches are connected and using Cisco Dynamic Trunking Protocol SW1 is set to Dynamic Desirable
What is the result of this configuration?
- A . The link is in a down state.
- B . The link is in an error disables state
- C . The link is becomes an access port.
- D . The link becomes a trunk port.
Two switches are connected and using Cisco Dynamic Trunking Protocol SW1 is set to Dynamic Desirable
What is the result of this configuration?
- A . The link is in a down state.
- B . The link is in an error disables state
- C . The link is becomes an access port.
- D . The link becomes a trunk port.
Refer to the exhibit.
The following must be considered:
• SW1 is fully configured for all traffic
• The SW4 and SW9 links to SW1 have been configured
• The SW4 interface Gi0/1 and Gi0/0 on SW9 have been configured
• The remaining switches have had all VLANs added to their VLAN database
Which configuration establishes a successful ping from PC2 to PC7 without interruption to traffic flow between other PCs?
A)
B)
C)
D)
- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.
The following must be considered:
• SW1 is fully configured for all traffic
• The SW4 and SW9 links to SW1 have been configured
• The SW4 interface Gi0/1 and Gi0/0 on SW9 have been configured
• The remaining switches have had all VLANs added to their VLAN database
Which configuration establishes a successful ping from PC2 to PC7 without interruption to traffic flow between other PCs?
A)
B)
C)
D)
- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.
The entire contents of the MAC address table are shown. Sales-4 sends a data frame to Sales-1.
What does the switch do as it receives the frame from Sales-4?
- A . Perform a lookup in the MAC address table and discard the frame due to a missing entry.
- B . Insert the source MAC address and port into the forwarding table and forward the frame to Sales-1.
- C . Map the Layer 2 MAC address to the Layer 3 IP address and forward the frame.
- D . Flood the frame out of all ports except on the port where Sales-1 is connected.
B
Explanation:
https://www.ciscopress.com/articles/article.asp?p=3089352&seqNum=6
What event has occurred if a router sends a notice level message to a syslog server?
- A . A TCP connection has been torn down
- B . An ICMP connection has been built
- C . An interface line has changed status
- D . A certificate has expired.