Practice Free D-PDC-DY-23 Exam Online Questions
Which LSA type contains information about routes redistributed into OSPF?
- A . 3
- B . 10
- C . 5
- D . 8
Interface Ethernet 1/1/3 has been configured with an IP address, and the interface is UP.
How does the routing table present the associated network?
- A . Static
- B . Directly connected
- C . Dynamic
- D . Default
Match the type of OSPF packets with its description. There are more packet descriptions than OSPF packets.
- A . OSPF Packet type 1 – a) Link State Request
OSPF Packet type 2 – b) Hello
OSPF Packet type 3 – c) Database Description
OSPF Packet type 4 – d) Link State Acknowledgement
OSPF Packet type 5 – e) Link State Update - B . OSPF Packet type 1 – a) Link State Request
OSPF Packet type 2 – f) Link Local Address
OSPF Packet type 3 – c) Database Description
OSPF Packet type 4 – d) Link State Acknowledgement
OSPF Packet type 5 – e) Link State Update - C . OSPF Packet type 1 – a) Link State Request
OSPF Packet type 2 – f) Link Local Address
OSPF Packet type 3 – e) Link State Update
OSPF Packet type 4 – d) Link State Acknowledgement
OSPF Packet type 5 – c) Database Description - D . OSPF Packet type 1 – a) Link State Request
OSPF Packet type 2 – f) Link Local Address
OSPF Packet type 3 – b) Hello
OSPF Packet type 4 – d) Link State Acknowledgement
OSPF Packet type 5 – c) Database Description
What is a benefit of adding a virtual router partition in OS10?
- A . Allows VRRP to work in an active-active manner.
- B . Allow production traffic to have multiple redundant gateways.
- C . Allows for management interface to have an isolated routing table.
- D . Allows multiple logical IP subnets on a single LAN segment.
What benefit does VRRP version 3 provide over VRRP version 2 in OS10?
- A . Provides preemption capability.
- B . Provides MD5 authentication.
- C . Allows subsecond timers.
- D . Allows multiple masters in the topology.
When configuring a vrf instance for the management interface that has been in use, what step must be done first to configure it?
- A . Configure a management route
- B . Remove the default route
- C . Remove all configured settings
- D . Configure an IP Address
The following command is issued on S1: S1(config-router-ospf-1)# redistribute static
This makes the device what type of OSPF router?
- A . Backbone router
- B . ASBR
- C . ABR
- D . Designated router
In an NSSA, which type of LSA is used for redistribution?
- A . 3
- B . 4
- C . 5
- D . 7
What configuration must be common on iBGP neighbors to form an iBGP adjacency?
- A . Local preference
- B . Router-ID
- C . AS number
- D . Loopback interfaces
Match the NTP command with its function. There are more functions than commands.
